NAC authentication page URL

[blaxucisco]

Hi all,

is there any option to configure ip address and FQDN both for the NAC authentication URL on the base of vlan?

Thank you

[Faisal Sehbai]

Laxman,

You can have user pages based off of VLANs or OSs. Look at the User Pages section on the CAM gui.

HTH,

Faisal

[blaxucisco]

Hi Faisal,

sorry, my question was not clear as per my requirement.
my requirement is like this. if users from vlan 100 and 101 they should get NAC authentication page by ip address e.g. https://192.168.1.20/login.html and if users from the vlan 200 and 202 they should get https://nacserver.domain.com/login.html. tried to configure userpages but I couldn't find the URL address related configuration.

I

Thank you

Laxman

[Faisal Sehbai · Accepted solution]

Laxman,

That isn't possible. The redirection happens with whatever you have configured as your certificate name, so if cert is to an IP, the redirection happens to that IP. If cert's to a name, redirection happens there. You can't have two URLs set for redirection.

HTH,

Faisal

[blaxucisco]

Faisal,

Thank you very much for your answer. now I got the clear idea about this and I can explain to my client properly.

Thank you

Laxman