NAC Server + Clients ssue

[syedaltaf.shah]

Hello Guys,

I have been in very trouble with this NAC since last week, it started when there was power outage in datacenter and both of my NAC Servers went down.

After restart, now clients (Nac agents) are not switching to Normal VLAN from Authentication VLAN. they remain in Authentication VLAN.

There are some cilents connected to same switch , same vlan are working fine but 90% got in trouble.

Any one please any advice ? any tip etc. there is no problem troubleshooting tech in NAC either... All i can see in log is NAC client Joined. NAC Cilent Removed. Thats. it....

Please help!!!

[aswami300]

Hi Syed,

Can you please provide me following information:

1. Setup information (i.e RIP/VG, L2/L3, IB/OOB)

2. Version on CAM and CAS.

3. Do you have HA configured for CAM and CAS.

4. Logs from CAM and CAS.

5. Debug snmp error and packet from the switch.

6. IP address of client

I want to verify if SNMP trap is correctly sent and received.

--

Anubhav Swami (Anna)