This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.
Has anyone else seen this before?
I have a TAC case open but not having much luck.
I get the error when I try to delete a client. It also shows up on the bottom of the pxGrid page.
Solved! Go to Solution.
Assuming its broken now which used to work before, I believe you have valid license(s) and the service enabled.
If you SSH / Console in to ISE pxGrid node and run 'show application status ise' command, do you see the pxGrid service as 'running'?.
Did you try to disable and enable the pxGrid service (from Administration > Deployment) and then try to delete the client?
The service is running from the CLI. I have tried to disable and enable on both nodes, same thing,
The test connection in FMC works as well but no data is being exchanged. I know I should be able to delete the FMC client, because I have in the past.
I was hoping someone may have seen this before and could share how it was resolved.
What is the TAC case # ? Which ISE release is this?
If ISE server certificates are not signed by a common enterprise PKI, please review the instructions in How To: Deploying Certificates with pxGrid: Self-signed pxGrid Client and Self-signed pxGrid ISE Node
I would also suggest to review the application DEBUG logs pxgrid/pxgrid-*.log