Notification by ASA on any configuration change

[jvalin__s]

Hi guys,

can we configure the ASA to send mail whenver any configuration change has been done.

Regards,

[Ivan Martinon]

My best advise is the following:

First analyze the logs on the ASA with full mode and make a configuration change, see what message is logged after making any change to anything.

Then create a loggin list including or for that message only

Use this logging list with the logging mail command as below

Logging List:

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/l2.html#wp1754683

Logging Mail:

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/l2.html#wp1751895

hth

Ivan