Obtaining latest version of "Network Setup Assistant" air-gapped ISE

[rezaalikhani]

Hi all;

If ISE is implemented in air-gapped scenarios (where ISE cannot connect to the internet), how can I download the latest version of  Network Setup Assistant for Windows from Cisco's web site?

Thanks

[ahollifield]

This is for BYOD use-cases?

[rezaalikhani]

Yes as you can see below:

[ahollifield]

I'm not sure if that is published anywhere outside of ISE itself.  I would open a TAC Case and see if the engineer could share it with you directly.

That being said, you are going to have a tough time with BYOD Client Provisioning updates without direct access to the internet.  Windows OS updates, Apple iOS updates, etc. etc.

Also, if the environment is secure that ISE cannot have direct or proxy access to the internet why is BYOD a use-case here?  What's the use-case for allowing unmanaged devices onto the internal network?  Why not use an MDM instead?

[rezaalikhani · Accepted solution]

We are utilizing BYOD for contractors who require access to the network solely for internal resource usage, not internet access.

Nevertheless, using the following link, we can download the latest version of packages used for BYOD and Posture...

https://iseservice.cisco.com/ise/provisioning-update.xml