/opt usage is high on cisco ISE disk - Policy service node

[Kishan M]

How to clear the /opt usage. /opt : 76% used  

Internal filesystems:
/ : 21% used ( 2924316 of 14987616)
/dev : 0% used ( 0 of 32892028)
/dev/shm : 0% used ( 0 of 32903380)
/run : 1% used ( 1228 of 32903380)
/sys/fs/cgroup : 0% used ( 0 of 32903380)
/boot : 25% used ( 113874 of 487634)
/storedconfig : 2% used ( 1590 of 95054)
/tmp : 1% used ( 6216 of 1983056)
/opt : 76% used ( 129583924 of 180485852)
/run/user/440 : 0% used ( 0 of 6580680)
/opt/docker/runtime/overlay/44680bceb63efe27d47dcaf91e5295a1cbf551b1147bb5634f1cc350b1173ec9/merged : 76% used ( 129583924 of 180485852)
/opt/docker/runtime/containers/e715bb4b381e1951dd25e12669edfb2e5d2ccb7b56b709010148e9395d32925f/shm : 0% used ( 0 of 65536)
/run/user/301 : 0% used ( 0 of 6580680)
/run/user/321 : 0% used ( 0 of 6580680)
/run/user/0 : 0% used ( 0 of 6580680)
all internal filesystems have sufficient free space

Directory of disk:/

0 Apr 10 2019 13:59:02 .SS_Install
3817 Feb 12 2019 00:47:10 Current-Active-Sessions.xml
4096 Dec 05 2021 19:01:02 corefileanalysis/
4096 Jan 21 2020 10:19:59 corefiles/
12288 Dec 03 2022 06:05:49 gc/
4096 Apr 10 2019 14:04:18 lost+found/

Usage for disk: filesystem
132694839296 bytes total used
42710867968 bytes free
184817512448 bytes available

[balaji.bandi]

/opt is occupied with space for different  - depends on patches, software, what version ISE ?

check what is occupied in /opt

is this impacting ISE performance?

[amnawajid5573]

Yeah you are right. It is to high and heavy. But you could customize it through custom coding. As we have customized it for showing matches schedule by a developer. Who is expert in these coding etc. SO try to customize it as it will become short and will perform the same funtion which it is doing. 

[Greg Gibbs · Accepted solution]

ISE is a locked down system. There is no way to gain root access without TAC support, so there is no way to manually free up space in the /opt directory.

The ISE application runs various services and containers to support the various features. There are strict requirements around CPU, Memory, and disk sizes that should be sufficient based on the scale of the cluster. From ISE version 2.7, the minimum disk size supported for any ISE node is 300GB. If you are using ISE 2.7 or higher, you would need to rebuild your ISE VM to resize the disk to meet the minimum 300GB required.

See the Install Guide for more details on the disk size requirements based on the deployment model (standalone, distributed, etc).

[Kishan M]

Hi Greg,

We had 180GB disk, we resized to 320GB and installed the 3.1p4 . All looks fine now