cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1746
Views
0
Helpful
4
Replies

ISE : Add new vendor for network device profile

Nancy Saini
Cisco Employee
Cisco Employee

Is there any way we can add a new vendor shown in the Vendor list while creating a new Network Device Profile.

 

Screenshot 2019-12-11 at 2.13.02 PM.png

1 Accepted Solution

Accepted Solutions

Arne Bier
VIP
VIP

good question - sounds like a feature enhancement request. I think Cisco put "other" in there but it would be handy to make that user configurable. I have not checked ISE 2.7 but your screenshot still applies in ISE 2.6.

View solution in original post

4 Replies 4

marce1000
VIP
VIP

 

 - Might depend on current ISE version being used and or use a sufficient recent version to get more possibilities.

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Arne Bier
VIP
VIP

good question - sounds like a feature enhancement request. I think Cisco put "other" in there but it would be handy to make that user configurable. I have not checked ISE 2.7 but your screenshot still applies in ISE 2.6.

We're using ISE version 3.1, "vendor" still not configurable and some well know vendors are not on the list.

These can certainly be added under the RADIUS dictionaries section.  Along with a custom Network Device Profile.