Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
523
Views
0
Helpful
3
Replies

Per User ACL with Wireless LAN Controllers and Cisco Secure ACS5.x Configuration Example??

haibo li
Level 1
Level 1

‎10-10-2015 05:47 AM - edited ‎03-10-2019 11:08 PM

who has Per User ACL with Wireless LAN Controllers and Cisco Secure ACS5.x Configuration Example?

and Per User ACL with Wireless LAN Controllers and Cisco Secure ACS5.x and Active Directory Configuration Example ?

who can help me ?

 

Labels:
0 Helpful
3 Replies 3

jan.nielsen
Level 7
Level 7

‎10-12-2015 11:32 AM

Are you talking about the ability to send the name of an ACL already configured in the WLC ? If yes, then all you need to do, is send the value "Airespace-ACL-Name" = "name of ACL in WLC", should be in the ACS dictionary already. WLC's however do not support downloadable ACLs like switches do, where the ACL is created in the radius server (ACS, ISE and so on)

0 Helpful

haibo li
Level 1
Level 1
In response to jan.nielsen

‎10-12-2015 11:43 PM

it's not name of ACL,it's per user of ACL.   have You  relevant documents??

0 Helpful

jan.nielsen
Level 7
Level 7
In response to haibo li

‎10-13-2015 09:04 AM

Not sure what feature you are referring to, in a regular wlc config centrally switched to the WLC from the AP, there is no such feature, are you talking about the FlexConnect mode per user ACL ?

0 Helpful
Customers Also Viewed These Support Documents