Per user bandwidth rate limit.

[yusuf.ujjainwala]

                   How to configure per user bandwidth rate limit for wireless guest client, authentication server is ISE 1.2 & wireless controller is 5760.

[Robert Salazar]

There are Advanced Attribute Settings in the Authorization profiles.

There is a bug in WLC code that effectively ignores the AV pairs sent from ISE.

Bug id is CSCsd14297. Should be fixed in 8.0 code.

Will have to wait for that version for now.

[kaaftab]

WLC code 7.3 onwards you can do bi-directional rate limiting chech the guide given below or use third party solution 

http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/113682-bdr-limit-guide-00.html

[blenka]

The Cisco 5760 WLC supports better QoS than other c

ontrollers, allowing prioritization of mission-crit

ical

applications:

●

The Cisco 5760 WLC supports four wireless hardware

queues and priority-based queuing compared to

software-based queuing in existing controllers.

●

The Cisco 5760 WLC follows MQC based commands, allo

wing usage of exact commands for configuring

QoS on different types of network devices.

●

The Cisco 5760 WLC supports QoS policies to be appl

ied in a hierarchical fashion with more granularity

per SSID per radio, while on the current controller

s granularity is per WLAN.

●

The Cisco 5760 WLC supports approximate fair bandwi

dth to make sure of fairness at client, SSID, and

radio levels for Non-Real Time (NRT) traffic. There

fore, if one user consumes excessive bandwidth, we

can

limit the amount of bandwidth that user receives an

d thereby not deprive other users.