10-13-2001 09:02 PM - edited 02-21-2020 09:57 AM
Peeps:
I'm currently using Cisco 2511 to accept PPP connections through asynchronous ports. I've configured PPP to authenticate locally and it works just fine, but the problem is i can't see the username of the person who connected to my asynchronous line.
example:
Line User Host(s) Idle Location
1 tty 1 Async Interface 00:00:00
That's it, no user is seen on terminal 1 but the user is there online.
Need your inputs here.
benche
10-15-2001 07:06 AM
I didn't try yet but "show caller" can be helpfull
10-15-2001 08:27 AM
Sir:
I've tried that but it still doesnt work. My IOS version is 11.2.
Line User Host(s) Idle Location
* 0 con 0 idle 0
1 tty 1 Async interface 0
Thanks.
10-15-2001 12:09 PM
Benjamin,
Try this ....show user. Also, debug your ppp sesion with the following and see if you can see the username..use
debug ppp negotiation
and
debug ppp authentication
also you could debug your aaa with
debug aaa authentication
and
debug aaa authorization
give it a whirl an let me know how it works for you..
11-05-2001 12:14 PM
what commands are you using to get that info. You can do a "show users" to view the current users. If you want the info logged, you probably have to set up aaa accounting and set up a radius or tacacs+ server. Hope this helps.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide