07-15-2019 06:11 AM
I have a customer that has an 8 node deployment, and he recently created 2 separate VMs and assigned pxgrid personas to them (active/standby).
Since they're not part of the 8 node deployment, the information from them (8 nodes) won't be shared unless he joins these two new nodes to the deployment, right? Or does he need to assign the pxgrid persona to one of the existing nodes on the deployment?
Thanks,
Solved! Go to Solution.
07-15-2019 06:56 AM
Again, the former. The PXG nodes need registered as part of the ISE deployment in order to publish or consume data for the deployment. As Mike.Cifelli pointed out, whether adding the persona to an existing ISE node or using dedicated, please refer to http://cs.co/ise-scale
07-15-2019 06:30 AM
The former. The PXG nodes need part of the ISE deployment.
07-15-2019 06:37 AM
Thanks for your reply.
So, he needs to add those new nodes where he enabled pxgrid to the deployment? Also, does pxgrid need to be enabled on PAN or can it be on a PSN or MnT node?
07-15-2019 06:56 AM
Again, the former. The PXG nodes need registered as part of the ISE deployment in order to publish or consume data for the deployment. As Mike.Cifelli pointed out, whether adding the persona to an existing ISE node or using dedicated, please refer to http://cs.co/ise-scale
07-15-2019 06:31 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide