Question about missing RADIUS IETF Attributes in ACS 3.1

[IWAN HOOGENDOORN]

We have ACS version 3.1

Vodafone is using IETF RADIUS Attributes.

The only thing we have to do is set our IETF RADIUS Attributes in our ACS server for the Primary and Backup DNS servers.

The list of the attributes can be found here:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/secur_c/scprt6/scradatb.htm

You will see that we need these attributes:

135 Primary-DNS-Server

136 Secondary-DNS-Server

The only problem is that we simple CAN’T find this attribute in our ACS 3.1.

If we go to a group and we try to look for attribute 135/136 it’s not there.

If we look into the HELP of ACS 3.1 we see this:

“To configure an attribute that does not appear in the current listing, click Interface Configuration, click IETF RADIUS, then select the applicable RADIUS check box.”

If we do this we see a list of all kind of attributes …but it ends at attribute 91.

Can someone please tell me where I can find and configure this IETF RADIUS Attribute 135/136?

Thanks,

Iwan Hoogendoorn

CCIE#13084

[nikhil_m]

Iwan,

any update on this ?

[IWAN HOOGENDOORN]

nope still no update ...

Still need some help on this question...

Thanks

Iwan Hoogendoorn

[b_learoyd]

Iwan,

have you made any progress on this ? I've got a similar problem with acs 3.2 attributes 8 and 26 and I'm looking for clues.

Barry.

[IWAN HOOGENDOORN]

Hi,

I still havent made any progress on this...

It's absolutly killing me...

Please advise when you have the solution...

CCIE# 13084

[rolalo]

Hi! I believe I had the similar problem.

I have an Equinox CCM Serial Console Server and would want to authenticate thru Cisco Secure ACS 3.1.

I have passed thru the Authentication process, Problem is, How do I passed user-rights attribute from the ACS back to the CCM.

I got this error.

RADIUS - No Access Mask Returned