Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am having problems with my IOS DHCP server. One particular workstation is consuming most the lease address.I have this configurationip dhcp pool 0 network 192.168.0.0 255.255.0.0 domain-name acme.com dns-server 192.168.79.22 192.168.11.14 20...
I am upgrading my 3620 router installed with NM-1FE1CE1B and NM-30DM modules, with a 3725 router installed NM-1CE1T1-PRI.My existing configuration is E1-R2 for Remote Access by Dial-In.Unfortunately I cannot configure my NM-1CE1T1-PRI for E1-R2,Here ...
I am using a Cisco 3600 router for RAS application. It has an E1 controller module for the E1 lease line connection and also have mica modems installed inside. Username and password are manually encoded in the router for AAA functions. My users are d...
I have a LAN with 167 VLANS.My core switch is a Catalyst 6509,I have redundant Supservisory 2GE module with MSFC2.I want to configure the Switch as a DHCP server for the 150 plus VLANs.Is this possible?
Good Material,I have another question. I am tracing this workstation on what port it is connected.I was able to trace other ports: (using the "show mac-address table" command) But, I am unable to find this particular client identifer addresses whic...
Hi! I believe I had the similar problem.I have an Equinox CCM Serial Console Server and would want to authenticate thru Cisco Secure ACS 3.1.I have passed thru the Authentication process, Problem is, How do I passed user-rights attribute from the ACS...
Thanks for the fast response Mark,though I can't seem to configure the characteristics of the E1 controller.The ds0-group command is not supported:controller E1 0/0 framing NO-CRC4 ds0-group 0 timeslots 1-15,17-31 type r2-digital r2-compelled ani ca...
