Radius server redundancy

[Soumik Mondal]

Dear all

I am trying to implement MAC based authentication for users .I have configured it with Microsoft AD and NPS with Cisco 2960.Every thing is working fine with test environment.Now I want to configure two NPS server as radius .Does Cisco switch supports two radius servers.Can any body help me how to implement this .

Regards

Soumik Mondal 

[nspasov · Accepted solution]

Yes, you can have multiple servers listed in the CLI and they will be processed in a "top-down" fashion. For more info check this link:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_55_se/configuration/guide/scg_2960/sw8021x.html

Thank you for rating helpful posts!

[Soumik Mondal]

Hi

This is working ...

Thanks for the information ...

[nspasov]

Yes, you can have multiple servers listed in the CLI and they will be processed in a "top-down" fashion. For more info check this link:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_55_se/configuration/guide/scg_2960/sw8021x.html

Thank you for rating helpful posts!