Cisco ACS Local Certificate

[ypomero06]

Hello,

I work on ACS version 5.6 and I would like to add a second certificate for the EAP in local Certificate.

I don't know if i can without delete the first.

Could you please help me.

Best regards 

[nspasov · Accepted solution]

Unfortunately you can only have one (1) certificate coupled with the EAP protocol. With that being said, you don't have to delete the original certificate. You can add the second certificate and enable with for EAP. This will automatically remove the EAP binding from the first certificate. But at the end, only one certificate can be tied to the EAP protocol. 

I hope this helps!

Thank you for rating helpful posts!

[ypomero06]

Thanks a lot for your help

[nspasov]

No problem! If your issue is resolved, please mark the thread as answered! :)