I'm using Cisco ACS 3.3 for RADIUS. How to do I make Vendor-Specific attribute available? (Attribute number 26, format: OctetString)
The online help makes reference to it, but does not tell you how to make it available.
Configure your NAS to authenticate using "Cisco IOS/PIX". By deafult, VSAs are visible for Groups. You need to enable this functionality if you need it on a per-user basis. This can be enabled under the "Interface Configuration" button in the UI.
Hope this helps.
I've done this, but when I go to group configuration I see no attributes under this heading.
I'm using the 90 day trial version, but was under the assumption that it had full functionality.