07-19-2013 01:55 AM - edited 03-10-2019 08:40 PM
Hi All,
Could any one please explain what RADIUS views are ?
any help will be much appriciated.
Many thanks.
Kamarn.
Solved! Go to Solution.
07-19-2013 05:05 AM
awwh, parser view this is also called RBAC - Role based access control.
Here are few examples you may refer while configuring it. In case you have any issues, post your queries here.
https://supportforums.cisco.com/docs/DOC-15765
~BR
Jatin Katyal
**Do rate helpful posts**
07-22-2013 04:47 AM
I tried to check this in the feature navigator tool but couldn't find anything related to pareser view or RBAC.
http://tools.cisco.com/ITDIT/CFN/jsp/SearchBySoftware.jsp
Command reference says that The view keyword and view-name argument were integrated into Cisco IOS Release 12.2(33)SRB.
http://www.cisco.com/en/US/docs/ios/security/command/reference/sec_e1.html#wp1059941
Have you tried to enable the same fetaure on some other code/image?
~BR
Jatin Katyal
**Do rate helpful posts**
07-19-2013 02:26 AM
Hi kamran,
I didn't understand your last web query. Could you please elaborate your question?
~BR
Jatin Katyal
**Do rate helpful posts**
07-19-2013 02:49 AM
Hi Jatin,
I have been told to conifugre views in RADIUS. I dont know myself what it is.
Have you heard anything like that in RADIUS ?
Many thanks.
07-19-2013 04:19 AM
Hi Jatin,
Its called parser view.
Many thanks.
07-19-2013 05:05 AM
awwh, parser view this is also called RBAC - Role based access control.
Here are few examples you may refer while configuring it. In case you have any issues, post your queries here.
https://supportforums.cisco.com/docs/DOC-15765
~BR
Jatin Katyal
**Do rate helpful posts**
07-19-2013 05:14 AM
Thank you ever so much Jatin you are the star !!!
07-22-2013 02:27 AM
Hi Jatin,
I was just trying to enable view but seems like command doesnt exist in the IOS. Do you know the command to enable parser view. I am using cisco 2960 switch.
any help will be much appriciated.
Many thanks.
07-22-2013 04:08 AM
How are you enabling view through console or telnel/ssh session?
~BR
Jatin Katyal
**Do rate helpful posts**
07-22-2013 04:19 AM
Hi Jatin,
I am enabling through cosole, and the IOS image I am using is c2960-lanbasek9-mz.122-35.SE5.bin
Do all IOS images support parser views or i need a specific image for that ?
many thanks.
07-22-2013 04:47 AM
I tried to check this in the feature navigator tool but couldn't find anything related to pareser view or RBAC.
http://tools.cisco.com/ITDIT/CFN/jsp/SearchBySoftware.jsp
Command reference says that The view keyword and view-name argument were integrated into Cisco IOS Release 12.2(33)SRB.
http://www.cisco.com/en/US/docs/ios/security/command/reference/sec_e1.html#wp1059941
Have you tried to enable the same fetaure on some other code/image?
~BR
Jatin Katyal
**Do rate helpful posts**
07-22-2013 06:49 AM
Hi Jatin,
I did not try on any other relase this is the only available release I have.
Do you know where I could find which IOS image supports which feature set ?
many thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide