cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

413
Views
7
Helpful
4
Replies
Eric Knudson
Cisco Employee

References for ISE 2.x performance with 2960-X stacks

We’re assisting in an ISE migration from 1.4 to 2.1 on stacks of 2960-Xs, seems like we’re running into CPU performance issues on the 2960-Xs - just as a sanity check, are we successfully running ISE w/profiling on stacks of these switches?

1 ACCEPTED SOLUTION

Accepted Solutions
hslai
Cisco Employee

Cisco Identity Services Engine Network Component Compatibility, Release 2.3 shows it so ISE profiling should work on that model of Cisco switches. Please follow it up with Cisco TAC and the switch platform team for issues specific to that platform.

View solution in original post

4 REPLIES 4
hslai
Cisco Employee

Cisco Identity Services Engine Network Component Compatibility, Release 2.3 shows it so ISE profiling should work on that model of Cisco switches. Please follow it up with Cisco TAC and the switch platform team for issues specific to that platform.

View solution in original post

joshhunter
Enthusiast

Hello Eric, did you resolve this issue?

 

I have a customer with the same problem, configuration is okay, however the stack of 2960-x switches have started to have high CPU once .1x configuration is applied.

 

Process such as Auth Manger and CPU - EPM ACL PLUG-IN  are very high. 

 

Had a Cisco TAC case open for a couple of months now, it has gone to the Architecture team, they suspected memory leak, we keep sending outputs but so far no answer.

Bump - Anyone experience High CPU with 2960x Stacks and 802.1x configuration.
TAC Case raised since May 2019, but still no further progress.

I’d also recommend posting under the switching forum
Content for Community-Ad