cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
596
Views
3
Helpful
2
Replies

Remote Access to Network when AAA server is down help

dan hale
Level 3
Level 3

Hi All, I have a Cisco ASA 5510. I have configured Cisco Anyconnect to authenticate via Windows IAS. We had an outage of that server recently and I tried to remote in via anyconnect and could not. Once the IAS server came up I could get back into the network.

Is there a command that I'm missing that will let me use Anyconnect to connect into the network even if my AAA server is down?

Here is my command of the AAA part of the config....

aaa-server WindowsIAS protocol radius

max-failed-attempts 5

aaa-server WindowsIAS (inside) host 192.168.2.15

key xxxxxxxxxx

radius-common-pw xxxxxxxxxx

Thanks in advance....Dan

1 Accepted Solution

Accepted Solutions

Tarik Admani
VIP Alumni
VIP Alumni

Dan,

Try to append the LOCAL key word to your authentication-server-group statement in your tunnel group or group policy.

http://www.cisco.com/en/US/docs/security/asa/asa90/command/reference/a3.html#wp1719328

Thanks,

Sent from Cisco Technical Support iPad App

View solution in original post

2 Replies 2

Tarik Admani
VIP Alumni
VIP Alumni

Dan,

Try to append the LOCAL key word to your authentication-server-group statement in your tunnel group or group policy.

http://www.cisco.com/en/US/docs/security/asa/asa90/command/reference/a3.html#wp1719328

Thanks,

Sent from Cisco Technical Support iPad App

Wow Thanks....that was much easier than I thought. Picked the correct tunnel group and tested...worked!!

Thanks,

Dan

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: