Report requirement to verify certificates used by end user/device.

[dilnaazhum]

Hello,

Do we have any options in cisco ISE to identify, which certificates has been used by endpoint to get authenticated.

Is there anyways in pulling report based on above mentioned statement.

CISCO ISE 2.4 patch 10

Thanks and regards

Afeez Mali

[Mike.Cifelli · Accepted solution]

You can generate radius authentication reports that will show you the identity used. If you have issued machine Certs based on host name/fqdn then you should see that reflected as the identity. If you take a peek at a detailed view of a radius authentication log you should be able to identify this as well.

[dilnaazhum]

Thanks Mike..

Was looking for ways to pull report of communication with certificates details, rather than dig down each radius authentication logs..

Thanks and regards

Afeez Mali