07-07-2015 10:41 PM - edited 03-10-2019 10:53 PM
Dear All,
Currently we have Cisco ACS 1121 ver 5.2 in our production , then we will replace with the new appliances using SNS 3425 ver 5.6 ,
Please kindly help anybody can provide information how to restore all of the old devices (ACS 1121 ver 5.2) configuration to the new ones ?
Best Regards
Yudibagam
Solved! Go to Solution.
07-10-2015 04:38 PM
Hi there! You will need to upgrade the current appliance to a min of v5.4 for the restore to work and be supported.
However, if you are going to go through the troubles of upgrading then I would suggest you upgrade all of the way to 5.6 just to be safe :)
I hope this helps!
Thank you for rating helpful posts!
07-10-2015 04:38 PM
Hi there! You will need to upgrade the current appliance to a min of v5.4 for the restore to work and be supported.
However, if you are going to go through the troubles of upgrading then I would suggest you upgrade all of the way to 5.6 just to be safe :)
I hope this helps!
Thank you for rating helpful posts!
07-21-2015 11:12 PM
Ok thanks neno
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide