restore configuration from cisco ACS 1121 ver 5.2 to SNS 3425 ver 5.6

[yudibagam]

Dear All, 

Currently we have Cisco ACS 1121 ver 5.2 in our production , then we will replace with  the new appliances using SNS 3425 ver 5.6 , 

Please kindly help anybody can provide information how to restore all of the old devices (ACS 1121 ver 5.2) configuration to the new ones ?

Best Regards

Yudibagam

[nspasov · Accepted solution]

Hi there! You will need to upgrade the current appliance to a min of v5.4 for the restore to work and be supported. 

http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-6/release/notes/acs_56_rn.html

However, if you are going to go through the troubles of upgrading then I would suggest you upgrade all of the way to 5.6 just to be safe :)

I hope this helps!

Thank you for rating helpful posts!

[yudibagam]

Ok thanks neno