cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
475
Views
1
Helpful
2
Replies

Sanity Check on first purge ISE 1.4

James Spencer
Cisco Employee
Cisco Employee

Greetings,

I'm looking for additional sanity checks on the ISE 1.4 purge rule below.  Looks clean and simple but it's the first ever purge on this 1.4 installation and the DB has > 500k entries now.  This is in prep for an upgrade to 2.2 (likely)

Blessings or concerns welcome.

Thanks.

1 Accepted Solution

Accepted Solutions

Jason Kunst
Cisco Employee
Cisco Employee

If there are a lot of items being purged it might slow the system, would recommend doing it on the weekend. Also they can start the purge with greater amount of days to remove risks.

Example greater than 300 days

Then 200 days

Then 100 days

This way it doesn’t remove a significate amount at 1 time.

Also they can manually purge with the button on the page

View solution in original post

2 Replies 2

James Spencer
Cisco Employee
Cisco Employee

purge-rule.PNG

Sorry missed the image now included.

Jason Kunst
Cisco Employee
Cisco Employee

If there are a lot of items being purged it might slow the system, would recommend doing it on the weekend. Also they can start the purge with greater amount of days to remove risks.

Example greater than 300 days

Then 200 days

Then 100 days

This way it doesn’t remove a significate amount at 1 time.

Also they can manually purge with the button on the page