02-03-2015 03:41 PM - edited 03-10-2019 10:24 PM
Hi,
I am trying to send the credentials of a guest user via sms, but does not work. I used the following parameters in configuration of the SMS gateway (ISE):
http://admin:12345@192.168.71.11/cgi-bin/exec?cmd=api_queue_sms&username=admin&password=admin&destination=$mobilenumber$&api_version=0.08&channel=5&content=
when I run a test in:
ISE: Guest Access--> Configure --> Guest Types --> Contractor --> test SMS
...the result is satisfactory
But my sms gateway does not receive any sms, its as if the ISE not send something
If I put this http://admin:12345@192.168.71.11/cgi-bin/exec?cmd=api_queue_sms&username=admin&password=admin&destination=999999991&api_version=0.08&channel=5&content=Mensaje+de+prueba
in a web browser, it works!
sorry for my English, thank you very much for your help!
Gustavo.
02-24-2015 01:42 AM
Gustavo,
I have the exact same problem.
I am going to rollback the the Patch 1 and try on the base release. I have another site with
SMS format issues and was told by Cisco Support to rollback to base and try.
I will let you know what happens after the rollback today.
Dale
02-24-2015 07:34 AM
Hi Dale,
i've tried with the base version and it did not work.
02-24-2015 02:00 PM
I finnaly got my ISE version 1.3 and 1.3.1 to work. It was a fail in the url string.
Make sure that you down load the ISP's url's info.
I set a pc on the same nett as the ISE and saw the http traffic. So then I knew the ISE was sending tcp 80 traffic. then I knew it was a url format problem.
good luck
dale
04-02-2015 04:37 PM
http traffic (ise: 10.100.156.11 / sms gateway: 192.168.71.10)
ise--> sms gateway
sms gateway ---> ISE
http://admin:L1c34T3csup!@192.168.71.10/cgi-bin/exec?cmd=api_queue_sms&username=admin&password=adm1n123!&content=$message$&destination=$mobilenumber$&api_version=0.08&channel=3
04-06-2015 07:06 PM
Hi
would you please explain the format for the URL and how to get it from the SMS gateway ?
thank you in advance
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide