Setup Guest SSID with data cap and other features via ISE

[Lovleen Arora]

Hi,

We have Cisco 5760 WLCs and 3602-i APs. We have been asked to roll-out Guest wireless service with self registration portal (using ISE for AAA).

Self-registration is working fine with ISE, but we have few requirements which we are not sure how to achieve:

1. 0.5 GBytes (download) per day per device for a maximum of 168 (7 days) non-contiguous
hours,

2. apply 2 device per user limit for Guest connection

Thanks

Lovleen
 

[jan.nielsen]

I'm fairly certain that the WLC does not support "quota" type QoS, but only bandwidth limiting, which in your case is useless, as 0,5GB/day converted to bandwidth terms (kbps), would be so low, it would be unusably for the guest.

Setting ISE so that you can only login with one device with the same account.is doable in ise 1.3 and higher, by changing the settings for that guest type.