Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
Thanks in advance.
I need to know how do i apply this new activation key?
same activation key to both ASAs?
first apply it to Cisco ASA Secondary standby and reload it.
and then failover to secondary and make it active.
and then apply the same...
Can I share a vlan interface between a routed and transparent context on an ASA?
why I need it; the customer wants to mirror traffic from an internal vm connected to the routed context network, and then mirror everything in/out of that vm to a hardwa...
Hi,
I have had very minimal experience with IP multicast, so asking for some help here.
We have 2 requirements in our network:
1. There is present multicast running in the network. We have 2 WAN connections from our main router which is the rp. as p...
ASA5520 (v9.0.4)- We are running an RSA 2FA - We would like to establish different VPN access profiles that enable us to segregate the traffic that we’re passing on to our internal FW based on which VPN profile the user chooses.- ...
Hi,
We have a Guest user SSID built-in similar to other SSIDs in the network. We use ISE for authentication and authorization of guest users via the portal.
We have a requirement that we want to cap the guest user data to 2 GB per day per user per c...
With WAN, do you mean internet or your other branch/L2 extension network.
If it is your LAN extension through a WAN, then you can just make use of routing either static or dynamic.
If it is from internet, then you can do static ip/port translation on...
Hi Peter,
Thanks for number#1.
I have prepared the following script for it.
RP-router:
ip access-list stand 10
interface gig3/12
description wan-link
ip pim sparse-mode
ip multicast boundary 10 out
on the wan router
inter gi1/0/48
ip pim sparse-mod...
