SNMP Common Language Equipment Identifier/CLEI support in ISE MIB?

[tertang@cisco.com]

Trying to confirm if ISE SNMP has CLEI MIB object that stores the hardware chasiss barcode ?

Checked the https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/admin_guide/b_ise_admin_guide_23/b_ise_admin_guide_23_chapter_0100100.pdf but nothing there.

[Mark Elsen]

                          - What if you try to query an object from the particular MIB ?

 M.

[tertang@cisco.com]

don't believe the ISE MIB has another OID object that contains the hardware chassis barcode/identifier.

[Greg Gibbs · Accepted solution]

See the following community post related to monitoring ISE via SNMP:

Monitoring ISE health using SNMP Polling 

The ISE application has a limited view of the underlying hardware, so polling the application would not provide the hardware chassis identifier.

The ISE SNS-34xx/35xx/36xx appliances, however, are built on the UCS series servers. You might be able to get the info you're seeking by SNMP polling the CIMC on the UCS server itself. Have look at the MIB Reference for Cisco UCS Standalone C-Series Servers.

[thomas]

ISE supported MIBs are documented in the ISE CLI Guide under snmp-server community since you enable SNMP via the CLI.