SNMP polling of the ISE server

[rasmus.elmholt]

Hi

I have a monitoring solution(OMD) that polls all my network devices for statistics using SNMP.

But I can't find a place to configure the SNMP community on the ISE server.

Only the SNMP setting for the end devices.

[Rahul Govindan]

You can use the ISE 2.1 CLI to configure the SNMP server information. More information on the commands here:

http://www.cisco.com/c/en/us/td/docs/security/ise/2-1/cli_ref_guide/b_ise_CLIReferenceGuide_21/b_ise_CLIReferenceGuide_21_chapter_011.html#id_19714

Information on what you can monitor is here:

http://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_011000.html#id_17078

I checked and could not find a location where this can be done on the GUI.