06-09-2019 02:49 AM
I am trying to find some information on the number of concurrent sessions supported when we use SNS 3615 as PAN in a dedicated deployment
All that I have found in this link is about using 3695 as PAN
https://community.cisco.com/t5/security-documents/ise-performance-amp-scale/ta-p/3642148
This particular deployment requires all nodes to be 3615
3615 as 2* PAN for redundancy
3615 as 2*MnT for redundancy
3615 as PSNs
I am trying to get numbers on the concurrent sessions for the same and also is this a validated design, will it be supported by Cisco TAC?
Solved! Go to Solution.
06-09-2019 01:47 PM
06-09-2019 08:15 AM
10,000 active sessions per 3615 PSN.
I'm not sure if a dedicated 3615 has been tested, I'll chime in but this is by no means an official answer. If we looked to scaling of prior releases, with dedicated 3595 PAN/MNT's we were able to do 500k active endpoints. The 3695 has 8,000 more Mhz on CPU and an extra 32 GB. You would hope it would be able to handle the same, and I'm assuming that 3695's are to reach the 2 million. Certainly a grey area between 500k and 2 million.
Using similar logic, the 3615 matches up to the old 3495 appliance. You were able to handled 250k active endpoints, and each dedicated 3495 PSN was rated for 10k.
06-10-2019 03:16 AM
Thanks, will look for a more official stance on the same :)
06-09-2019 01:47 PM
06-10-2019 03:25 AM
06-10-2019 09:48 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide