cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

764
Views
5
Helpful
2
Replies
Highlighted
Beginner

SSH setup is not connecting

I have config this config for ssh on a Cisco router

line vty 0 4
login local
transport input ssh
But when I run the show ssh I got following output

%No SSHv2 server connections running.

I'm happy for any suggestions, thanks

 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Do you have ssh enabled?
ip ssh version 2 -yes
ip ssh time-out XXX - No
ip ssh authentication-retries xx - no
generate keys: crypto key generate rsa general-keys label <NAME> mod 2048 - Yes set it to 2048.

Thanks for your suggestions about the time out it might help in my case.

View solution in original post

2 REPLIES 2
Highlighted
VIP Engager

Do you have ssh enabled?
ip ssh version 2
ip ssh time-out XXX
ip ssh authentication-retries xx
generate keys: crypto key generate rsa general-keys label <NAME> mod 2048
HTH!
Highlighted

Do you have ssh enabled?
ip ssh version 2 -yes
ip ssh time-out XXX - No
ip ssh authentication-retries xx - no
generate keys: crypto key generate rsa general-keys label <NAME> mod 2048 - Yes set it to 2048.

Thanks for your suggestions about the time out it might help in my case.

View solution in original post