cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

358
Views
0
Helpful
1
Replies
Highlighted
Cisco Employee

Stealth Temporal Agent Limitations and Consideration

Hi Experts,

 

I have a customer asks about our agentless approach, firstly I found a couple of trainings through topic and it is referred as Stealth Temporal Agent right? If yes, what are the limitations on Posture Condition and Remediation side, on admin guide of ISE and Anyconnect, I was able to find limitations on both "Temporal" and "Stealth" separately but not entirely sure if Stealth Temporal Agent has both of it combined? Do you have a documentation that explains it? On top of that customer is interested in Windows Update and AV version check.

 

Regards

 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Re: Stealth Temporal Agent Limitations and Consideration

Hi,

Yes, it is called the Stealth Temporal Agent. It currently supports the following conditions (windows only):

- AM installation
- Firewall enabled
- Application inventory
- Hardware inventory
- USB check

If the customer wants to check AV status, they will need to use the Temporal, AnyConnect Stealth or AnyConnect agents.

Regards,
-Tim

View solution in original post

1 REPLY 1
Highlighted
Cisco Employee

Re: Stealth Temporal Agent Limitations and Consideration

Hi,

Yes, it is called the Stealth Temporal Agent. It currently supports the following conditions (windows only):

- AM installation
- Firewall enabled
- Application inventory
- Hardware inventory
- USB check

If the customer wants to check AV status, they will need to use the Temporal, AnyConnect Stealth or AnyConnect agents.

Regards,
-Tim

View solution in original post