Summary report of postrure check with NAS IP and Port number

[Jay Tiwari]

Hi Experts,

One of my customer is looking for posture report which will be having machine host-name, switch port where machine is connected to and switch (NAS/NAD) IP address. Is it possible to get all the parameters in single report?

As of now customer is running with ISE-2.4P5 and can see posture report (Report-> Posture Assessment by Endpoint) which has machine MAC address, user identity but not host-name and NAS information like IP address and port number. Although i got bug ID CSCvj83362 which is going to be fixed in 2.4 P8 and after which customer can see host-name in report.

Many Thanks,

[Nidhi · Accepted solution]

2.4 patch 8 was released this week. 

NAS details are not part of posture report as of now. Please reach out to PM with your use case.

Thanks,

Nidhi 

[Jay Tiwari]

Thanks Nidhi!

Could you please let me know whom should i reach to with customer use case.

Regards,

Jay

[Nidhi]

Replied offline !

Thanks,

Nidhi