tacacs+ accounting with ACS 3.3 (log is always empty)

[o-ziltener]

ACS 3.3.1; configuration:

aaa accounting commands 15 default start-stop group tacacs+

aaa accounting connection default start-stop group tacacs+

On the ACS the log under "TACACS+ accounting" isn't show session duration for logged-in user.

any input is very welcome!

[gfullage]

"aaa accounting connection" is only for sessions initiated FROM the router (outbound connections), not TO it. Add the following command and you should then see the users under the Logged-In user section:

aaa accounting exec default start-stop group tacacs