11-17-2010 03:53 PM - edited 03-10-2019 05:35 PM
I am looking for documentation for setting up WCS controllers to use TACACS+ authentication. The current controllers are using TACACS+ authentication but we have two new controllers that we want to setup to use TACACS+. Tried to add the TACACS+ autentication and authorization but it does not work. Someone else set up the current controllers. Running 6.x WCS.
Solved! Go to Solution.
11-17-2010 11:47 PM
Hi,
I understand that you are talking about WLC (controller) and not WCS (Management software).
Configuring tacacs+ on wlc : http://www.cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/c60sol.html#wp1697872
Hope this helps.
Nicolas
===
don't forget to rate answers that you find useful
11-17-2010 11:47 PM
Hi,
I understand that you are talking about WLC (controller) and not WCS (Management software).
Configuring tacacs+ on wlc : http://www.cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/c60sol.html#wp1697872
Hope this helps.
Nicolas
===
don't forget to rate answers that you find useful
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide