01-24-2023 06:12 AM - edited 01-24-2023 06:25 AM
Hey ! I want to configure a server and a client both on two 2 VMs with Centos 7 linux on them.
However I can't find one source that works. I try to use tac_plus but I can't figure how to configure the client to use the server.
Is it even possible ? ( I have no access to routers so I want to recreate it with VMs)
Solved! Go to Solution.
01-26-2023 12:57 PM
Hi @Rem Markov
I have never tried tac_plus, but if you have a look at one of my old postings, there was a reply by a Community user (Christian Burr) on 2017-11-29 02:58 AM who provided some guidance. Might be helpful - or you could reach out to that user.
01-26-2023 12:57 PM
Hi @Rem Markov
I have never tried tac_plus, but if you have a look at one of my old postings, there was a reply by a Community user (Christian Burr) on 2017-11-29 02:58 AM who provided some guidance. Might be helpful - or you could reach out to that user.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide