02-10-2016 10:23 PM - edited 03-10-2019 11:28 PM
Hi!
When your authentications failover from 802.1x to MAB without an apparent reason what do you usually do to troubleshoot the process?
Thanks!
02-11-2016 12:28 AM
I usually go to the authentication server and check logs. Debugs on the switch also can help.
02-11-2016 04:17 AM
You could enable the following debugs:
debug aaa authentication
debug dot1x all
debug radius
Note that the output will be very verbose, so be careful on a busy production switch, and direct debug output to a buffer rather than the console.
Javier Henderson
Cisco Systems
02-11-2016 05:12 AM
What are the devices and their OS that are having this issue? It will also be helpful to post some screenshots of their supplicant configuration.
Thank you for rating helpful posts!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide