07-18-2024 04:24 AM
I had a previous post on this, but I found that the switch's firmware was severely behind, so I updated this switch, but I am still having issues with the AAA process.
I've attached the running config of the switch in question & I can ssh to the switch with local creds, but not with Radius creds. Attempting the radius login, just leads to a hung ssh session that never completes.
At the moment, this switch's config matches another 3750X switch we have with the same AAA config, so I'm not 100% where the issue lies.
07-18-2024 04:36 AM
there is no
default route or default GW in your SW how then SW can connect to AAA server?
MHM
07-18-2024 04:56 AM
Also I return you your old post
Mr. Rob send you command to config server I dont see it ?
you config server under server-group but you dont config server IP and key !!!!!!!!!
MHM
07-18-2024 04:41 AM
Are you using only RADIUS or do you also have TACACS?
TACACS:
tacacs-server host X.X.X.X
tacacs-server directed-request
tacacs-server key XXXXXX
AAA:
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication login LOCAL_CONSOLE local
aaa accounting commands 2 default start-stop group tacacs+
07-18-2024 04:50 AM
No TACACS, just Radius
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide