upgrade from ACS 4.1.1 to 4.1.4 or 4.2

[mirboukai]

hi

i want to upgrade the acs(windows) from 4.1.1 to 4.1.4 or 4.2

there is 1 document i know ... it says

---------------------------------

ACS 4.1.1.23 or ACS 4.1.1.24

to ACS 4.1.3 or ACS 4.1.

can upgrade from ACS 4.1.1.23, 4.1.1.24, to ACS 4.1.3 or 4.1.4 on Windows.

----------------------------------

but when i download the 4.1.3.12 redme file it says :

Prerequisites

=============

This is a patch for release ACS 4.1.3. ACS 4.1.3 must be installed before

=================================

installing this patch.

======================

Other prerequisites are same as for ACS 4.1.3

so shall i agnot this notice or what ??

and if i have a cco login and i want to download a fresh 4.2 can any one give a linke to download this from cisco coz i didn't found it.

regards

[Jagdeep Gambhir]

ACS full software's are not listed on CCO and you need to contact TAC to get one.

On site all you will get are patches. Once you have a software you can upgrade using upgrade path you have.

Regards,

~JG

Do rate helpful posts