User Privileges with Radius

[rajeshp20]

Hi,

Client has CPE managed devices. Wireless CPE Devices used are Radwin, Cambium to name a few.

Requirement is the NOC User should have Read or Read-Write access to these devices from GUI perspective. Currently client is using open source radius server where the user attributes are defined, the access privileges - read/read write is defined in radius server.

Can we assign the read or read /write privileges for NOC users in ISE?

Please note these devices does not support TACACS. Current ISE version used is 2.3.

Regards

Rajesh

[hslai]

This depends on how the privileges are defined in the existing RADIUS server but most likely the configurations can be migrated over to ISE.

There are a few guides on the net showing how to use the RADIUS services in ISE for device admin. For example,

• Cisco CLI access using Radius and ISE
• Integration of Firepower System with ISE for RADIUS User Authentication