02-27-2018 09:28 AM
Hi Team,
Could somebody help me with the process , from Licensing perspective, when it comes to enable the AC posture on a Virtual ISE version 2.1.
- Does the APEX license needs to be fulfilled on the ASA if you want to enable the posture on ISE?
- Is there a required license on the ISE for the same?
Many thanks in Advance!
Solved! Go to Solution.
02-27-2018 07:03 PM
Adding to Tim's and Jason's, here is the official FAQ -- AnyConnect Licensing Frequently Asked Questions (FAQ) - Cisco
02-27-2018 11:30 AM
For posture, you will need the Apex license install in ISE. If you are going to use AC 4.X, you will need the AC Apex license but it no longer is required to be installed on the ASA from want I understand.
Regards,
-Tim
02-27-2018 12:03 PM
If you’re not going to posture with VPN then the anyconnect apex license doesn’t need to be installed anywhere as it’s right to use when doing wired wireless posture
02-27-2018 07:03 PM
Adding to Tim's and Jason's, here is the official FAQ -- AnyConnect Licensing Frequently Asked Questions (FAQ) - Cisco
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide