Hi. We are trying to do WCCP between a Bluecoat proxy and and a 3750X. Bluecoat supports L2 or GRE WCCP
Switch is running 15.0(1)SE3 Universal
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 54 WS-C3750X-48P 15.0(1)SE3 C3750E-UNIVERSALK9-M
(c3750e-universalk9-mz.150-1.SE3.bin)
According to this document:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/15-0_1_se/configuration/guide/3750xcg/swwccp.html
We should be able to configure L2 WCCP on this switch/ios. But the commands aren't available:
SWITCH(config)#ip wccp ?
% Unrecognized command
SWITCH(config)#
I know we have to have ip services, but isn't this included in our universal image?
We should change the preferred sdm template from "desktop default" to routing, but this won't change the command set, will it? It just re-allocates resources.
What do we have to do to run L2 WCCP on this switch? Thanks.
