Network Access Control

Hello Community,I try to configure a redundant guest access with 2 ISE und 2 guests anchors. ISE Management and the sponsor portal are connected to eth0 (gig0) with hostname ise1.mydomain.com (ise2.mydomain.com for 2nd ISE). Eth0 is reachable from co...

We are running ISE 1.4 across our campus network, currently with a mix of MAB and dot1x authentication (migrating all devices to dot1x is moving slower than expected), and have come across an interesting issue with a new batch of Polycom conference s...

Hi, all we have a couple of ACS with version Cisco Secure ACS 5.4.0.46.6, and we are trying to add custom attributes in a new shell profile for setting the privilege level for Nexus switches, according to:  http://www.cisco.com/c/en/us/support/docs/s...

Background: I am the technical lead on a project to standardize router and switch logins for a Fortune 100 company based on Cisco ACS 5.7. The Cisco ACS installation was pre-existing and used by one of the (many) silos in the organization and is now ...

Hello, ich started a few days ago with a Cisco WLC 5520 ( V 8.2.100.0) Cluster and a ISE ( 2.0.0.306 / Patch2).Today i make the Settings with help of this side "http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115732-centr...

     Hi all. in cisco's documentation, I found somthing about split acs deployment where both acs boxes can act as primary in their zones and then secondary for the other zone respectively, but I don't seem to understand how this can be done on the t...

Hi team,I am looking for some help, my customer has to ACS for AAA of infrastructure devices, primary and backup, with database replication; also they have two ISE appliances: the first one, as monitoring role and the second one, as administration an...

Cisco ISE 1.3. Problem: Some workstations are not doing posture, after observation noticed that the switches are to redirect to the ISE standalone (Secondary), but the primary be active. At this time turn off the secundary to return to normal operati...

Hi I am trying to configure my Cisco ACS 5.4 via TACACS for Nexus 7000 (NXOS 6.2(2)).  Following this documentationhttp://www.cisco.com/c/en/us/support/docs/security/secure-access-control-system/115925-nexus-integration-acs-00.htmlBut when logging in...

I am using the CISCO ISE REST API and I want to be able to get the client IP address. I have been reading the Monitoring REST API documentation here: http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/api_ref_guide/api_ref_book/ise_api_ref_ch1.htm...