03-12-2002
02:40 AM
- last edited on
02-21-2020
11:36 PM
by
cc_security_adm
Does anyboby know which are the ports that the ACS v3.0 on Windows2000/NT Server opens? This is because I have to open an access on a Firewall for people connecting to the ACS to manage it by browser.
03-12-2002 02:56 PM
hi,
As you can see when connecting to the ACS console the used port is assigned dynamically. In fact, you launch your connection using a specific port, but this one is chnaged dynamically. I don't now if there is a way to put it to a fixed value...
Regards,
Marc Halleux.
03-13-2002 12:46 PM
Initial port to login to ACS NT is 2002 but after that ACS generates random ports. Now you can configure the ACS to generate those port numbers from a pool of a port or a single port all the time for administrator..Based on that you can open those ports on PIX.
That config is under "Administraction Control" tab click on "access policy" and go down and look for "Restrict Adminsitation Sessions to the following port range From Port"..By default the port range is from 1024 to 65535. But you can limit it to one or a range..Hope this helps..Thx..Tejal
03-14-2002 01:09 AM
Thanks a lot, I found this option in the ACS Server and I 've just configured. So my doubt has been solved.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide