Wired Guest Hotspot for ISE

[Terence Lockette]

Hello all,

Is there any straightforward documentation for ISE 2.3 that explains and demonstrates how to setup and configure wired guest hostpot access on the switch and ISE side of the config?  I'm able to get the WLAN portion working properly and now I want to mirror this on the wired side.  The WLAN side is just an AUP for our guests.  However, we have dedicated ports on our switches for guests to plug in to and would like to present this same AUP to the wired side.  However, I can't seem to find any consistent documentation on how to accomplish this as much of what's out there seems to be all over the place as it relates to the dACLs, Web redirect ACLs, etc.

Thanks.

[Nidhi · Accepted solution]

I suggest starting from here- 

https://community.cisco.com/t5/security-documents/ise-guest-amp-web-authentication/ta-p/3657224

Thanks,

Nidhi 

[Jason Kunst]

Agreed please look at the prescriptive guide for wireless on that community page

[Terence Lockette]

Thanks guys but I don't need the guide for the wireless portion as my issue was related to the wired side of the guest hotspot portal.  Wireless part works fine.  Fortunately, I was able to find my problem and get it working.