03-19-2007 06:31 AM - edited 02-21-2020 10:17 AM
We are using the Cisco 871 series routers for VPN connectivity. I am testing the 871W for for VPN and wireless connectivity. I am able to get the VPN working but am having trouble with the wireless authentiction using PEAP and authentication via active directory. The problem is, my router cannot, because of the VPN connection, "talk" directly to my authentication server using the LAN ip address. I can get authentication to work if I pass the traffic through the internet, punching a hole in my firewall to complete the authentication process. This is not my preferred method. What can I do to get around may VPN access lists that are preventing my direct connectivity to my server?
Solved! Go to Solution.
03-19-2007 07:33 AM
Are you able to ping the ip address of radius server through the tunnel ?
Try adding this :
ip radius source-interface BVI1
*Please rate if helped.
-Kanishka
03-19-2007 07:05 AM
Is the Authentication server located at the other end of the tunnel ?
Please provide a snippet of the relevant configuration so that we can suggest some changes.
-Kanishka
03-19-2007 07:16 AM
03-19-2007 07:33 AM
Are you able to ping the ip address of radius server through the tunnel ?
Try adding this :
ip radius source-interface BVI1
*Please rate if helped.
-Kanishka
03-19-2007 07:46 AM
JACKPOT! That did it! Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide