WLC 5508 (ver >7.2) and ISE 1.1.2

[Luciano Vigano']

Ciao,

I found this interesting article:

Dynamic VLAN Assignment with RADIUS Server and Wireless LAN Controller Configuration Example

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml

And I'm wondering if the same configuration will work with ISE 1.1.2.

My needs are:

- one SSID

- according to authentication (for guest: user\pwd in ISE database; for employees certificate or user\pwd M$ AD) moved to a VLAN or another

Ciao e grazie!

Luciano

[Philip Vilhelmsson]

Hi,

Did you find an answer to your question?

I am looking to do the same, with FlexConnect APs.

//Philip

[edondurguti]

If you have centrally switched enviroment and WLC 7.2 sure it will work, but if you have flexconnect(local switching) APs it will not work on 7.2, you will need to upgrade to 7.3

Hope it helps

[Philip Vilhelmsson]

What is it that doesn't work in 7.2? COA, dVLAN?

In the FlexConnect Feature Matrix it say that local switching is supported in 7.2.110.0.

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080b3690b.shtml

[edondurguti · Accepted solution]

Philip,

My bad, I apologize for the confusion, they put so many numbers on the back

here this might help.

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bcb905.shtml