WLC integration with ISE

[Asfandyar70754]

Hello everyone

I am using Cisco Wlc 2504 and Cisco ISE 2.4 in my environment right now. I have a remote location what is connected to my main location. Recently I have installed and configured one more AP at my remote location in Flex Connect mode. I have configured authorization of remote location SSID with ISE, but for some reason users randomly get disconnected.

What could be the issue here?

[balaji.bandi]

There are many reasons.

1. provide the version WLC code - AP Model and core running.

2. How many effected

3. how many users per AP connected if all working ?

4. how is your network stability ?

[Asfandyar70754]

1. Let me confirm
2. Right now I connected only 3 users for testing, and randomly those 3 users got disconnected
3. Right now hardly 1-2
4. Yes I did ping my switch at remote site, no packet loss

[Mike.Cifelli]

My recommendation would be to run some debugs from the WLC for the client/s having the issue.  Should be something along these lines:

debug mac addr ####
debug client <mac>
debug aaa all enable

debug disable all

[Asfandyar70754]

Do you want me to run these commands on Remote site AP?