Adding NXOS 9000 to the CML "Personal" account/subscription

[nezar-swaileh]

Hi There, trying to test some XVLAN configuration using my CML "Personal" cloud subscription, however, noticed that the existing images are not supporting this config. I believe it required to have NXOS-9000 series to do this.
As you can see in the attached picture, "Add/Mange" buttons are not active,

The question is how to download/add this image?

[Flavio Miranda]

@nezar-swaileh 

 What devices do you have and what versions?VXLAN is supported in newer  IOS-XE

[bigevilbeard]

@nezar-swaileh not sure what the “cloud” edition is? You. Can run vxlan in version nexus9300v64.10.2.5.M.ova, which is NX-OS version 10.2.5.

Here is a blog which explains how to do this https://lostintransit.se/2023/08/18/caveats-when-deploying-nexus9000v/

[nezar-swaileh]

I am not talking about the OVA setup I am talking about the CML cloud based not the offline based.

[bigevilbeard]

@nezar-swaileh i am sorry, i am not aware what the cloud based version is? Do you have a link to this?

[nezar-swaileh]

Hi There,

Thanks you for your cooperation: here we go

https://developer.cisco.com/site/sandbox/

I'll check the New IOX-XE.

[bigevilbeard · Accepted solution]

@nezar-swaileh Thanks! I see your issue now. There was NX9K was removed the sandbox for capacity/scaling reasons. See the following post: https://community.cisco.com/t5/devnet-sandbox/new-updates-to-cml-and-nso-sandbox-labs/td-p/5207063 

Also with the sandbox you aren’t able to upload new or other images which aren’t already present.