3750 snmp trap per stack failure

[sthon-dbsys]

Hi there,

Problem: I have some 3750 with 2 or 3 stack member. if one stack fail, the switch is working normal, "only" some interfaces are not accessible.

is there a possibillity to send a snmp trap, if one of my stack members in a 3750 fails (reboots or crash).

thx in advance

[rmushtaq]

If you have "snmp-server enable trap fru-ctrl"

configured on the 3750 stack, a FRURemoved trap (as defined in CISCO-ENITTY-FRU-CONTROL-MIB) should be generated when one of the switches in the stack goes down.