A serious problem for LMS 4.1

[CSCO11616177]

Hi guys,

        1.When I want to add a CPU alarm, prompted me:

"

Message

Failed to Create Alarm !

Cause

1)Could be invalid value for some of the entries

2)Could be due to lack of access to the host,invalid SNMP credentials or a busy device.

Action

1)Verify the values entered for all the entries.

2)Verify that the Alarm Variable resolves to one of the following ASN.1 primitive types

. INTEGER

. Integer32

. Counter32

. Counter64

. Gauge

. TimeTicks

3) Verify access, SNMP credentials or increasing timeout value through

Message
Failed to Create Alarm !

Cause
1)Could be invalid value for some of the entries
2)Could be due to lack of access to the host,invalid SNMP credentials or a busy device.

Action
1)Verify the values entered for all the entries.
2)Verify that the Alarm Variable resolves to one of the following ASN.1 primitive types
. INTEGER
. Integer32
. Counter32
. Counter64
. Gauge
. TimeTicks
3) Verify access, SNMP credentials or increasing timeout value through

        2.After I  enable HTTPS ,login LMS finished entering username password I need to manually modify the port number. Link

I need change 1741 to  443, otherwise, can not access

3.Topology Services. It prompts me to download Java again and again

Every time I have installed have prompted this

But have not been able to properly display

Help me, please

Thanks a lot

[AFROJ AHMAD]

Hi ,

For the First issue :: try to delete and re-add the device ,make sure you have the correct SNMP credentilas

Second Issue:

Delete the existing shortcut and create new one by following the below steps.

1.       Right click on the desktop , choose New Shortcut.

2.       Shortcut wizard appears, enter http://:1741 for location and click Next.

3.       Enter Cisco Works for name and click Finish.

4.       Right click on the newly created icon ,choose properties , click on Change Icon and select Cisco works icon from the

location \MDC\etc\.ico and click finish.

Third Issue:

manually copied the following three required

jar files [(avalon-framework-4.1.5-sign-1-3.jar, jacorb-sign-1-3.jar, and

logkit-1.2-sign-1-3.jar) ] from the %NMSROOT%/htdocs/campus/res directory to  the CLIENT MACHINE

C:\Program Files\Java\jre6\lib\endorsedd

Hope this will help you !!

Thanks

Afroz

[CSCO11616177]

Hi ,dear Afroz

      Thanks for your help

      The Third Issue has been resolved,the other two did not.

      For the  first problem:

                  Can you tell me which is the correct Trap Community?

            

                 I use the SNMPV3 .

                 My configuration is as follows:

                       snmp-server community RORORO RO

                       snmp-server community RWRWRW RW

                       snmp-server group lms v3 priv

                       snmp-server user cisco lms v3 authen md5 cisco123 priv aes 128 cisco123

                       snmp-server host 10.10.10.10 inform ver 3 authen cisco

                       snmp-server host 10.10.10.10 traps ver 3 priv cisco

                       snmp-server engineID remote 10.10.10.10 upd-port 162 12a123dd123

                       snmp-server enable traps

                Will the configuration error ?

                Why engineID has been randomly? E.g. :80000009030058BFEAAEDD01 .It's not my want.

               And in the figure above, I should fill which?

         For the second problem: 

               I use the client machine .

              I enter the URL directly，e.g. https://10.10.10.10  but the URL go to http://10.120.16.120:1741.

           I guess this has nothing to do with the shortcut

  Help me

Thanks

[katerina.dardoufa]

I too had the problem with the jar files!

Thank you so much for your answer Afroz!